DSP 20-5

Screw Extruder

The material to be processed by the screw extruder DSP 20-5 is charged into a feeding hopper. The screw extruder can also be driven without feeding hopper; in such a case, a direct material feed to the auger of the DSP is necessary. The auger moves the material to be pressed towards the discharge area through a basket. During this process the water contained in the material is pressed out. The screw extruder is driven by a hydromotor and a planetary gear. The screening baskets can quickly and easily be mounted to the screw extruder frame by means of clamping plates and wedges. Stainless steel covers serve as a splashguard